$42.00

Digital Flow Monitor  (Counting Down, Alert)   Made by Digiflow USA

• Counting down: set a volume in gallons then it starts counting down when water passing through it.  It will beep at the end of countdown. Counting down from: min 100 gal; max 9900 gal.

• Elapse time: counting down, counting down from: min. setting 30 days,  max setting 720 days.

• Real time Flow rate:  0.22 to 2.1 GPM (gallons per minute)  ** Minimum flow rate 0.22 GPM

Model: 8100T -G (gallon model)   (internal part no. FM-81cable)

• Flow totalizing up to 2600 gallons or 9999 Liters
• Flow rate display from 0.22 gallons per minute to 2.1 GPM
• Connection:  1/4” NPT
• Electrical:  3 DC Volt (two AA battery)   1.0mA (display mode) 0.015mA (idle)
• Low battery power alert
• Automatic data saving when battery is out
• Reset button:  press and hold the button for 5 sec. to reset to zero

Material:

• Sensor body: Acetal copolymer, TICONA M90
• Turbine:  Acetal Copolymer
• Turbine shaft: #304 stainless steel
• O-ring:  EPDM Rubber
• Housing:  ABS resin

Specification:

• Dimension: (display) 2 3/4" x 2 1/4" x 1 3/8”
• Cable length from sensor to display:  56 inches
• Operating temperature: 40F to 172F  or 4 C to 80 C
• Max operating pressure: 85 psi or 6 bar
• Accuracy: +/- 10%