$158.00

Aquatec 5853 Booster Pump Assembly for 200-300GPD RO systems (pre-wired)     MADE IN U.S.A.

Aquatec Model 5853-2LM2-B534

Internal Part # SET-HF8855-300 (for 1/4" tubing connections)

** For boosting water pressure in RO systems operation

** Main difference between this item SET8855-300 and the other item SET8855 is the Pressure Switch designed for RO system.

** Optional 3/8" connectors available.  If you need 3/8" connection solenoid valve or pressure switch, it will be $8 extra, please let us know.

 

Why buy from us?

1. Best price and best service.
2. We offer free tech support on the pumps, setup, and its applications.
3. We get the pumps directly from the manufacturer so they are always under warranty and most up-to-date. All brand NEW.

This water booster pump assembly is designed to be used for 200GPD to 300GPD Reverse Osmosis water systems.  It is pre-wired  so that the installation would be easy and neat.

The Pump assembly includes:

• Pump:                     Aquatec 5853 pump to boost input water pressure from 40psi to 80 psi  (Actual boost pressure depends on your RO system production rate and drain rate.)
• Reducer fitting:      Two reducer fitting 3/8" to 1/4".  The pump has standard input/output of 3/8"
• Transformer:         115VAC to 24VAC, 2.5 Amp, plug in to regular 110V electrical outlet, USA plug.
• Pressure switch (40PSI):  to make the pump and RO system function automatically.  It turns on/off the pump and solenoid valve when RO pure water output is closed or when the pressure tank is full. 
• Solenoid valve:        to turn off water supply when pressure switch turn it off, and turn on water when it is making water.
• Pressure gauge:      to indicate pump output pressure
• Instruction sheet.

NOTE:  Aquatec 5853 pump has an internal bypass mechanism it does not allow pressure to go higher than 130 psi for this model. 

NOTE:  This pump assembly is not for continuous duty.  If you need to run the pump more than 4 hours, you can use a timer to turn on one hour and turn off for 1/2 hour to cool down the pump and solenoid valve, or you can put a fan to blow air into the pump assembly to cool it down.

Specifications:

Booster Pump:
Boost pressure	If input water pressure is about 30 to 40 psi, the pump will boost pressure to about 70 to 80 psi for RO systems
Water open flow	3.8 liter per minute
Electrical:	24VAC
Connection	Inlet and outlet,  3/8" quick connect, connects to 3/8" OD tubing.  Including two reducer fitting 3/8 to 1/4, so you can use 1/4" OD for input /output
Motor	Permanent Magnet,  24VAC, enclosed
PUMP	Diaphragm pump, 3 chamber, self-priming.  It is able to run dry
Material:  Housing	Nylon
Valves	EPDM
Diaphragm	Santoprene
Fasteners	Stainless Steel
Dimension	diameter = 3.5" , length = 7.5"

 

Solenoid valve
Type	Normally Close (NC)   orifice opens when electrically energized
Electrical:	24VAC, Leads = 20 AWG
Water pressure	0 to 120 psi
Connection:	two ¼”x ¼” fitting included:  connect to ¼” tubing
Mounting	It has two screw holes for mounting
Material:  valve	Plastic valve body
Solenoid	brass outside body, stainless steel internal parts

 

Pressure switch
Type:	Normally closed (NC)  will cut off circuit when water pressure reaches 40 psi  (adjustable + - 10 psi)
Pressure	Cut off pressure at 40 psi,  maximum inlet pressure 120 psi
Connection	¼” compression ,  connect to ¼” tubing
Material	Polypropylene
Electrical: leads	20 AWG, 14” long
Max:	10A, 250Volts

 

Transformer
Input	115V/60Hz
Output	24VAC  2.5 Amps
Leads	18 AWG, 4 feet

 

*Important Note:  8855 is FilterDirect internal part number which is different from Aquatec part number.  There will be an overlay sticker #8855 affixed onto the pump and this is not against Aquatec policy.   FilterDirect is an authorized distributor of Aquatec.  If you have any doubt about our products and services please do not make a purchase.