Commercial Inine dual TDS meter
Standard Inine dual TDS meter (monitor)
This high quality inline dual TDS monitor is distributed by Filter Direct Co.
Model: DM-1
FEATURES |
- Displays
TDS levels of the feed water and product water with in & out electrode
probes.
- Highly
efficient and accurate due to its advanced microprocessor technology.
- Auto-Off
function conserves battery power. The unit shuts off automatically after
10 minutes of non-use.
- Dual Range
0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990
ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.)
-
Factory Calibrated: our meters are calibrated with a 342 ppm NaCl
solution. Meters can be recalibrated with a mini-screwdriver.
- Comes
equipped with John Guest Quick-Connect T-fittings as shown.
- Installs
quickly and easily
|
SPECIFICATIONS |
- Range:
0-9990 ppm
- Accuracy:
±2%
- Cable
Length: 24.5" (including sensor)
- Fittings:
1/4" standard, also available with 3/8" or 1/2" at additional $8 charge;
- Power
source: 2 x 1.5V button cell batteries (included)
- Battery
life: approx. 1000 hours of continuous use
- Size: 7.6
x 2 x 4.7 cm (3 x .8 x 1.9 in.)
- Weight:
79.4 g (2.8 oz.)
|
Measure the tap water coming in vs. the purified water going out of your system
at any time.
Use the meter to determine when the filters need to be changed.
Install on industrial systems such as car washes, window washing, manufacturing,
and food processing.
|