$158.00
Aquatec 5853 Booster Pump Assembly for 100-200GPD Aeroponics systems (pre-wired) MADE IN U.S.A.
Aquatec pump 5853-2LM2-B534 (custom made pump for aeroponics and misting and 300GPD RO systems)
Our internal part # SET-HF8855 (for 1/4" tubing connections)
** Main difference between this item and SET8855-300 is the Pressure Switch designed for Aeroponics system
** Optional 3/8" connectors available. If you need 3/8" connection solenoid valve or pressure switch, it will be $8 extra, please let us know
Why buy from us?
- Best price and best service.
- We offer free tech support on the pumps, setup, and its applications.
- We get the pumps directly from the manufacturer so they are always under warranty and most up-to-date. All brand NEW.
This water booster pump assembly is designed to be used for 100GPD to 200GPD Aeroponics water systems. It is pre-wired so that the installation would be easy and neat.
The Pump assembly includes:
- Pump Aquatec 5853 pump to boost input water pressure up to 130 psi
- Reducer fitting: Two reducer fitting 3/8" to 1/4"; this pump has standard input/output of 3/8"
- Transformer: 115VAC to 24VAC, 2.5 Amp, plug in to regular 110V electrical outlet, USA plug.
- Pressure switch (100PSI): to make the pump and RO system function automatically. It turns on/off the pump and solenoid valve when RO pure water output is closed or when the pressure tank is full.
- Solenoid valve: to turn off water supply when pressure switch turn it off, and turn on water when it is making water.
- Pressure gauge: to indicate pump output pressure
- Instruction sheet.
NOTE: Aquatec 5853 pump has an internal bypass mechanism it does not allow pressure to go higher than 130 psi for this model.
NOTE: This pump assembly is not for continuous duty. If you need to run the pump more than 4 hours, you can use a timer to turn on one hour and turn off for 1/2 hour to cool down the pump and solenoid valve, or you can put a fan to blow air into the pump assembly to cool it down.
Specifications:
| Booster Pump: |
| Boost pressure |
If input water pressure is about 30 to 40 psi, the pump will boost pressure to about 70 to 80 psi for RO systems |
| Water open flow |
3.8 liter per minute |
| Electrical: |
24VAC |
| Connection |
Inlet and outlet, 3/8" quick connect, connects to 3/8" OD tubingwe also included two reducer fitting 3/8 to 1/4, so you can use 1/4" OD for input /output |
| Motor |
Permanent Magnet, 24VAC, enclosed |
| PUMP |
Diaphragm pump, 3 chamber, self-priming. It is able to run dry |
| Material: Housing |
Nylon |
| Valves |
EPDM |
| Diaphragm |
Santoprene |
| Fasteners |
Stainless Steel |
| Dimension |
diameter = 3.5" , length = 7.5" |
| Solenoid valve |
| Type |
Normally Close (NC) orifice opens when electrically energized |
| Electrical: |
24VAC, Leads = 20 AWG |
| Water pressure |
0 to 120 psi |
| Connection: |
two ¼”x ¼” fitting included: connect to ¼” tubing |
| Mounting |
It has two screw holes for mounting |
|
Material: valve
|
Plastic valve body |
|
Solenoid
|
brass outside body, stainless steel internal parts |
| Pressure switch |
| Type: |
Normally closed (NC) will cut off circuit when water pressure reaches 100 psi (adjustable + - 10 psi) |
| Pressure |
Cut off pressure at 100 psi, maximum inlet pressure 120 psi |
| Connection |
¼” compression , connect to ¼” tubing |
| Material |
Polypropylene |
| Electrical: leads |
20 AWG, 14” long |
| Max: |
10A, 250Volts |
| Transformer |
| Input |
115V/60Hz |
| Output |
24VAC 2.5 Amps |
| Leads |
18 AWG, 4 feet |
*Important Note: 8855 is FilterDirect internal part number which is different from Aquatec part number. There will be an overlay sticker #8855 affixed onto the pump and this is not against Aquatec policy. FilterDirect is an authorized distributor of Aquatec. If you have any doubt about our products and services please do not make a purchase.
Log In | Checkout | 153 item(s)
153 item(s)