Log In Log In  |  Checkout   |  39 item(s)
1 x 532w, PAE RO Storage Pressure Osmosis Water Tank Container 4G
2 x Wrench 2 pcs 566 Standard Filter Housing Opener Double Better
1 x 5th Stage pn215 Refillable inline DI filter (color change)
1 x Optional: 566 Filter Housing Wrench Opener WaterGeneral System
1 x 326, 3rd stage TFC 24 /26 US membrane filter (replace 2-3 yrs)
1 x 701C, FHC1014 Filter Housing Chamber Casing Clear Color 1/4 FPT
1 x 6th Stage pn215 Refillable inline DI filter (color change)
1 x 215, 5th or 6th Stage Refillable inline DI filter (color change)
1 x KM701, Special Koolermax Filter Housing Canister Casing 1/4 FPT
1 x 290, CB2010BB Big Blue 20" Carbon Block Filter WH20 WH250 WH2201
1 x 213, 4th stage inline carbon filter (replace every 12 months)
1 x 733, Built-in Pressure Gauge 0 to 150 psi for Koolermax RO syste
1 x 205 2nd stage solid carbon block filter (replace every 12 month)
1 x 215, 5th or 6th Stage Refillable inline DI filter (color change)
1 x OPTIONAL: 567 Filter Housing Wrench Case Opener WHOLE HOUSE WH
1 x 913, 5th stage inline carbon filter (every 12 months)
1 x CP-OR35+701 O-RING FOR WATERGENERAL BOTTOM FILTER HOUSING CASING
1 x 6044-K Tee Fitting Compression Type 1/4"OD 1/4" NPT
1 x 4064K Male Connector Elbow 3/8 OD Compression Fitting 1/4 NPT
1 x Optional 566 Filter Housing Wrench Case Opener KoolerMax System
1 x 201, 1st stage sediment filter (replace every 6-12 months)
1 x 2nd stage C10 carbon block filter (replace every 6-12 months)
2 x 818, DI Resin Refill Bag 16oz (good for up to three refills)
1 x 701, FH1014 Filter Housing Chamber Casing White Color 1/4 FPT
1 x 6044-combo Compression Type Fitting Elbow and Tee fitting
1 x FPK, 6 pcs Fitting Pack Union Connector 1/4" quarter inch
1 x FPK, 6 pcs Fitting Pack Union Connector 3/8 x 1/4 inch
1 x 1044-K Male Connector 1/4 OD x 1/4 NPT Compression Fitting
1 x MK800, Maintenance kit for AR122, AR125, HK120, RD150, RO155
1 x 7044-K Union Tee Connector Fitting Compression type 1/4"
1 x 3rd stage C10 carbon block filter (replace every 6-12 months)
1 x FPK11, High Quality Fitting and Connector 1/4" (Value-Pack)
1 x Optional: 564 Membrane Filter Housing Wrench Opener
1 x 1st stage SF05 sediment filter (replace every 6-12 months)
1 x 5th or 6th Stage IC21 inline carbon filter (every 6 to 12 mons)
1 x CBV-0404, Tank Ball Valve to 1/4 tubing *standard RO tank size*
1 x RF62, Replacement filter for CT-6000, UC7000, SW-1, and SW-1C
View Cart$568.59
Home
Specials Log InCreate Account Checkout  Shopping Cart39 item(s)
1 x 532w, PAE RO Storage Pressure Osmosis Water Tank Container 4G
2 x Wrench 2 pcs 566 Standard Filter Housing Opener Double Better
1 x 5th Stage pn215 Refillable inline DI filter (color change)
1 x Optional: 566 Filter Housing Wrench Opener WaterGeneral System
1 x 326, 3rd stage TFC 24 /26 US membrane filter (replace 2-3 yrs)
1 x 701C, FHC1014 Filter Housing Chamber Casing Clear Color 1/4 FPT
1 x 6th Stage pn215 Refillable inline DI filter (color change)
1 x 215, 5th or 6th Stage Refillable inline DI filter (color change)
1 x KM701, Special Koolermax Filter Housing Canister Casing 1/4 FPT
1 x 290, CB2010BB Big Blue 20" Carbon Block Filter WH20 WH250 WH2201
1 x 213, 4th stage inline carbon filter (replace every 12 months)
1 x 733, Built-in Pressure Gauge 0 to 150 psi for Koolermax RO syste
1 x 205 2nd stage solid carbon block filter (replace every 12 month)
1 x 215, 5th or 6th Stage Refillable inline DI filter (color change)
1 x OPTIONAL: 567 Filter Housing Wrench Case Opener WHOLE HOUSE WH
1 x 913, 5th stage inline carbon filter (every 12 months)
1 x CP-OR35+701 O-RING FOR WATERGENERAL BOTTOM FILTER HOUSING CASING
1 x 6044-K Tee Fitting Compression Type 1/4"OD 1/4" NPT
1 x 4064K Male Connector Elbow 3/8 OD Compression Fitting 1/4 NPT
1 x Optional 566 Filter Housing Wrench Case Opener KoolerMax System
1 x 201, 1st stage sediment filter (replace every 6-12 months)
1 x 2nd stage C10 carbon block filter (replace every 6-12 months)
2 x 818, DI Resin Refill Bag 16oz (good for up to three refills)
1 x 701, FH1014 Filter Housing Chamber Casing White Color 1/4 FPT
1 x 6044-combo Compression Type Fitting Elbow and Tee fitting
1 x FPK, 6 pcs Fitting Pack Union Connector 1/4" quarter inch
1 x FPK, 6 pcs Fitting Pack Union Connector 3/8 x 1/4 inch
1 x 1044-K Male Connector 1/4 OD x 1/4 NPT Compression Fitting
1 x MK800, Maintenance kit for AR122, AR125, HK120, RD150, RO155
1 x 7044-K Union Tee Connector Fitting Compression type 1/4"
1 x 3rd stage C10 carbon block filter (replace every 6-12 months)
1 x FPK11, High Quality Fitting and Connector 1/4" (Value-Pack)
1 x Optional: 564 Membrane Filter Housing Wrench Opener
1 x 1st stage SF05 sediment filter (replace every 6-12 months)
1 x 5th or 6th Stage IC21 inline carbon filter (every 6 to 12 mons)
1 x CBV-0404, Tank Ball Valve to 1/4 tubing *standard RO tank size*
1 x RF62, Replacement filter for CT-6000, UC7000, SW-1, and SW-1C
View Cart$568.59
Categories
Aquarium RO+DI Systems
Drinking Water RO Systems
Aeroponics Hydroponics RO System
CounterTop Systems
Whole House Systems
Faucets Water Spout
Replacement Filters & Housings ->
TDS Meters & Flow Meters
Pumps
Valves
Fittings
Accessories
Components
Filter Housing Canister
Specialty Filters
Bulk Purchase
Information
Frequently Asked Questions FAQ
   -> System and Product Dimension
   -> Booster Pump / Low Pressure:
   -> Booster Pump Setup – Pressure Gauge and adjusting pressure:
   -> Tubing Operating Pressure and Material:
   -> Non Air-Gap Faucet:
   -> Draining water ratio: 1:3:
   -> RO System Knowledge Things You Should Know:
   -> How to install float valve FV14 FV15:
   -> UV BALLAST INFO:
   -> Aquatec CDP6800 wire and tapes:
   -> Water running continuously nonstop drain when tank is full:
   -> Requires drain water! DO NOT block off the drain:
   -> Tips on saving water:
   -> Pressure Gauge rattle sound:
   -> Faucet started dripping constantly:
   -> Fluoride Removal:
   -> Faucet Drill Hole Size:
   -> When to replace filters:
   -> Alkaline System and how it works:
   -> Add Alkaline filter to an existing system:
   -> TDS Calibration:
   -> Third Party Product Warranty Warranty Claims:
   -> Not using the drinking water feature on RD106:
   -> Tank takes long time to fill, troubleshooting:
   -> Not much or Little Water out of RO system:
   -> Leaking Faucet / Dripping faucet:
   -> K5 and RO585 difference:
   -> AR122 and RD102 are not a drinking water system:
   -> Why pumps are wet when they are new:
   -> Permeate pump and waste water:
   -> PH strips is not good:
   -> Pressure Gauge is missing:
   -> Clear Filter Housing Warning Advice:
   -> Unable to open Filter Housing:
   -> K5 Faucet Swap Substitute:
   -> Booster pump to increase pressure:
   -> Tank installation instruction:
   -> Permeate or Booster Pump Noise:
   -> When to replace filters:
   -> Why install booster pump before 4th stage membrane:
  Pressure switch does not shut off pump sometimes:
   -> TDS reading ppm of the filtered water:
   -> Is storage pressuer tank necessay for RO system:
   -> O ring o-rings of Filter Casing Housing not available:
   -> Flow meter display instruction:
   -> Flow meter measurement accuracy:
   -> Air Bubbles in the water:
   -> Whole House System vs RO System:
   -> Booster pump for misting application:
   -> Installation of Auto Shutoff Valve:
   -> DI Filter is leaking or unable to tighten:
   -> Cracked Elbow Fitting:
   -> What is Flow Restrictor in RO Systems?
   -> ESO and TSO:
   -> New Feed Water Adapter
   -> Instruction for Refilling the 215 Inline DI filter
Shipping,Tax,& Returns
Terms & Conditions
Privacy Notice
Warranty
About Us
Product Showcase
Aquarium Photos
Contact Us
Support Manuals

Pressure switch does not shut off pump sometimes:

To make the pump turn on/off automatically, you need to have this combination: pump, transformer, pressure switch (TSO) and solenoid valve (ESO). If you only have a pump, transformer, and pressure switch, the pump will not be able to turn off by itself.

The pressure switch should be connected at the pure water output line, so that when the tank is full, it would shut off the pump. The solenoid valve should be connected in front of the pump, so when the tank is full, it can shut off the water supply.


Quantity of nozzles you have will play a factor as well. You’ll need to adjust the pressure setting on the pressure switch to accommodate your application and the quantity of nozzles. To do so, you’ll need to use a small hex wrench to turn the hex screw clockwise 1 to 2 turns; then turn on your pump and water; allow the pressure to build up. This may take a few minutes.

Quantity of nozzles you have will play a factor as well. You’ll need to adjust the pressure setting on the pressure switch to accommodate your application and the quantity of nozzles. To do so, you’ll need to use a small hex wrench to turn the hex screw clockwise 1 to 2 turns; then turn on your pump and water; allow the pressure to build up. This may take a few minutes.
Continue
Home  |   Specials  |   Log In  |   Create Account  |   Checkout  |   Shopping Cart

Copyright © 2024 Filter Direct Online Store (C)