Log In Log In  |  Checkout   |  24 item(s)
1 x WT-bac, Water Testing Kit, Bacteria Test
1 x 205, 2nd stage carbon block filter (replace every 12 months)
1 x 532w, PAE RO Storage Pressure Osmosis Water Tank Container 4G
1 x OPTIONAL: 567 Filter Housing Wrench Case Opener WHOLE HOUSE WH
1 x CP-KOR45, O RING FOR KOOLERMAX BOTTOM FILTER HOUSING CASING
1 x KF355, Antique Brushed Brass / Iron Finish Drinking Water Faucet
1 x 213, 5th or 6th stage inline carbon filter (replace in 12 mons)
1 x 718, Tubing 30 feet 1/4" white tube LLDPE PE for drinking water
1 x 335, 4th stage TFC 35/45 US membrane filter (every 2-3 years)
1 x 799, Siphon Pump Drinking Water Liquid Fluid Oil Manual Trasfer
1 x FPK, 6 pcs Fitting Pack Union Connector 1/2 x 3/8 inch
1 x Value Pack- Entire 3 Years of Replacement Filters Bundle RD106
1 x 5th or 6th Stage IC21 inline carbon filter (every 6 to 12 mons)
1 x 6th Stage pn215 Refillable inline DI filter (color change)
1 x CKV0402, Blue color Elbow Check Valve Elbow Type
1 x KM701, Special Koolermax Filter Housing Canister Casing 1/4 FPT
1 x 3rd stage C10 carbon block filter (replace every 6-12 months)
1 x Parts, Ro Water System Installation Parts Bag 1/4"
1 x B2012, 20" Long Slim Filter Cartridge Housing RO260 RD322
1 x KF310, Elite Series: Polish Chrome Drinking Water Faucet
1 x 741-38, Diverter Valve for RO DI Water Systems
1 x RF62, Replacement filter for CT-6000, UC7000, SW-1, and SW-1C
1 x 759, Aquatec Demand Delivery Pump 5853-7E12-J524 Commercial 1.7G
1 x 565, Digital Pressure Gauge Tester Monitor

View Cart$751.90
Specials Log InCreate Account Checkout  Shopping Cart24 item(s)
1 x WT-bac, Water Testing Kit, Bacteria Test
1 x 205, 2nd stage carbon block filter (replace every 12 months)
1 x 532w, PAE RO Storage Pressure Osmosis Water Tank Container 4G
1 x OPTIONAL: 567 Filter Housing Wrench Case Opener WHOLE HOUSE WH
1 x CP-KOR45, O RING FOR KOOLERMAX BOTTOM FILTER HOUSING CASING
1 x KF355, Antique Brushed Brass / Iron Finish Drinking Water Faucet
1 x 213, 5th or 6th stage inline carbon filter (replace in 12 mons)
1 x 718, Tubing 30 feet 1/4" white tube LLDPE PE for drinking water
1 x 335, 4th stage TFC 35/45 US membrane filter (every 2-3 years)
1 x 799, Siphon Pump Drinking Water Liquid Fluid Oil Manual Trasfer
1 x FPK, 6 pcs Fitting Pack Union Connector 1/2 x 3/8 inch
1 x Value Pack- Entire 3 Years of Replacement Filters Bundle RD106
1 x 5th or 6th Stage IC21 inline carbon filter (every 6 to 12 mons)
1 x 6th Stage pn215 Refillable inline DI filter (color change)
1 x CKV0402, Blue color Elbow Check Valve Elbow Type
1 x KM701, Special Koolermax Filter Housing Canister Casing 1/4 FPT
1 x 3rd stage C10 carbon block filter (replace every 6-12 months)
1 x Parts, Ro Water System Installation Parts Bag 1/4"
1 x B2012, 20" Long Slim Filter Cartridge Housing RO260 RD322
1 x KF310, Elite Series: Polish Chrome Drinking Water Faucet
1 x 741-38, Diverter Valve for RO DI Water Systems
1 x RF62, Replacement filter for CT-6000, UC7000, SW-1, and SW-1C
1 x 759, Aquatec Demand Delivery Pump 5853-7E12-J524 Commercial 1.7G
1 x 565, Digital Pressure Gauge Tester Monitor

View Cart$751.90
Information

Leaking Faucet / Dripping faucet:

If the faucet is dripping slowly, then you need to adjust the black lever. The faucet is partially open so you would see slow drip.

To adjust the lever:
1. Pull the spout off the faucet. (pulling up)
2. Look at the black lever, there is a pin that holds the black lever in place, and observe that the position of the pin
3. Slide the black lever toward the opening to remove the black lever.
4. Look at the position of the pin, and turn the pin counter-clockwise to loosen it, (about 1 to 2 turns)
5. Slide the lever back, to do that you might need to hold the pin in place using a small object like a screw driver while sliding the lever back
6, Then put the spout back
7. You might notice that the lever should be slightly loose
Continue
Home  |   Specials  |   Log In  |   Create Account  |   Checkout  |   Shopping Cart