Log In Log In  |  Checkout   |  26 item(s)
1 x NM-5103, HONEYWELL COUNTERTOP WATER FILTER *DISCONTINUED* SW1
1 x SV-24DC-38-Brass KSD Solenoid Valve 3/8" brass 24V DC ESO
1 x 741-38, Diverter Valve for RO DI Water Systems
1 x 7044-K Union Tee Connector Fitting Compression type 1/4"
1 x 201, 1st stage sediment filter (replace every 6-12 months)
1 x .SW-1 COUNTERTOP WATER FILTER SYSTEM (WHITE HOUSING)
1 x 720, Feed Water Adapter with Needle Valve
1 x 741-14, Diverter Valve for Countertop Water Units
1 x 4042-K Male Elbow Fitting Compression type(membrane housing use)
1 x SV-24AC-14, Solenoid Valve for Aquatec pump only 1/4" 24VAC ESO
1 x PSW-380 Aquatec Pressure Switch 80 psi shut off 3/8" tubing TSO
1 x PSW-240 Aquatec Pressure Switch 40 psi shut off 1/4" tubing TSO
1 x SVkit, Pump Shutoff Switch Kit for Aquatec Booster Pumps ESO TSO
1 x Optional: 564 Membrane Filter Housing Wrench Opener
1 x PSW-2100 Aquatec Pressure Switch 100 psi shut off 1/4 tubing TSO
1 x .SW-1C COUNTERTOP WATER FILTER SYSTEM (CLEAR HOUSING)
1 x 399, 4th stage TFC-100 US membrane filter (every 2-3 yrs)
1 x SV-24AC-14, Solenoid Valve ESO for Aquatec pump 1/4" wiring
1 x Value Pack- Entire 3 Years of Replacement Filters Bundle RD102
1 x RF62, Replacement filter for CT-6000, UC7000, SW-1, and SW-1C
1 x 6044-K Tee Fitting Compression Type 1/4"OD 1/4" NPT
1 x 709C, Disc Shape Auto Shut Off Valve 4-way Four Way Valve
1 x 723, Feed Water Adapter with Ball Valve
1 x 701, FH1014 Filter Housing Chamber Casing White Color 1/4 FPT
1 x 721, Self-Piercing Valve, Feed Water Adapter for Copper Pipe
1 x NM-5104, HONEYWELL COUNTERTOP WATER FILTER *DISCONTINUED* SW1
View Cart$692.20
Home
Specials Log InCreate Account Checkout  Shopping Cart26 item(s)
1 x NM-5103, HONEYWELL COUNTERTOP WATER FILTER *DISCONTINUED* SW1
1 x SV-24DC-38-Brass KSD Solenoid Valve 3/8" brass 24V DC ESO
1 x 741-38, Diverter Valve for RO DI Water Systems
1 x 7044-K Union Tee Connector Fitting Compression type 1/4"
1 x 201, 1st stage sediment filter (replace every 6-12 months)
1 x .SW-1 COUNTERTOP WATER FILTER SYSTEM (WHITE HOUSING)
1 x 720, Feed Water Adapter with Needle Valve
1 x 741-14, Diverter Valve for Countertop Water Units
1 x 4042-K Male Elbow Fitting Compression type(membrane housing use)
1 x SV-24AC-14, Solenoid Valve for Aquatec pump only 1/4" 24VAC ESO
1 x PSW-380 Aquatec Pressure Switch 80 psi shut off 3/8" tubing TSO
1 x PSW-240 Aquatec Pressure Switch 40 psi shut off 1/4" tubing TSO
1 x SVkit, Pump Shutoff Switch Kit for Aquatec Booster Pumps ESO TSO
1 x Optional: 564 Membrane Filter Housing Wrench Opener
1 x PSW-2100 Aquatec Pressure Switch 100 psi shut off 1/4 tubing TSO
1 x .SW-1C COUNTERTOP WATER FILTER SYSTEM (CLEAR HOUSING)
1 x 399, 4th stage TFC-100 US membrane filter (every 2-3 yrs)
1 x SV-24AC-14, Solenoid Valve ESO for Aquatec pump 1/4" wiring
1 x Value Pack- Entire 3 Years of Replacement Filters Bundle RD102
1 x RF62, Replacement filter for CT-6000, UC7000, SW-1, and SW-1C
1 x 6044-K Tee Fitting Compression Type 1/4"OD 1/4" NPT
1 x 709C, Disc Shape Auto Shut Off Valve 4-way Four Way Valve
1 x 723, Feed Water Adapter with Ball Valve
1 x 701, FH1014 Filter Housing Chamber Casing White Color 1/4 FPT
1 x 721, Self-Piercing Valve, Feed Water Adapter for Copper Pipe
1 x NM-5104, HONEYWELL COUNTERTOP WATER FILTER *DISCONTINUED* SW1
View Cart$692.20
Categories
Aquarium RO+DI Systems
Drinking Water RO Systems
Aeroponics Hydroponics RO System
CounterTop Systems
Whole House Systems
Faucets Water Spout
Replacement Filters & Housings ->
TDS Meters & Flow Meters
Pumps
Valves
Fittings
Accessories
Components
Filter Housing Canister
Information
Frequently Asked Questions FAQ
   -> System and Product Dimension
   -> Booster Pump / Low Pressure:
  Booster Pump Setup – Pressure Gauge and adjusting pressure:
   -> Tubing Operating Pressure and Material:
   -> Non Air-Gap Faucet:
   -> Draining water ratio: 1:3:
   -> RO System Knowledge Things You Should Know:
   -> How to install float valve FV14 FV15:
   -> UV BALLAST INFO:
   -> Aquatec CDP6800 wire and tapes:
   -> Water running continuously nonstop drain when tank is full:
   -> Requires drain water! DO NOT block off the drain:
   -> Tips on saving water:
   -> Pressure Gauge rattle sound:
   -> Faucet started dripping constantly:
   -> Fluoride Removal:
   -> Faucet Drill Hole Size:
   -> When to replace filters:
   -> Alkaline System and how it works:
   -> Add Alkaline filter to an existing system:
   -> TDS Calibration:
   -> Third Party Product Warranty Warranty Claims:
   -> Not using the drinking water feature on RD106:
   -> Tank takes long time to fill, troubleshooting:
   -> Not much or Little Water out of RO system:
   -> Leaking Faucet / Dripping faucet:
   -> K5 and RO585 difference:
   -> AR122 and RD102 are not a drinking water system:
   -> Why pumps are wet when they are new:
   -> Permeate pump and waste water:
   -> PH strips is not good:
   -> Pressure Gauge is missing:
   -> Clear Filter Housing Warning Advice:
   -> Unable to open Filter Housing:
   -> K5 Faucet Swap Substitute:
   -> Booster pump to increase pressure:
   -> Tank installation instruction:
   -> Permeate or Booster Pump Noise:
   -> When to replace filters:
   -> Why install booster pump before 4th stage membrane:
   -> Pressure switch does not shut off pump sometimes:
   -> TDS reading ppm of the filtered water:
   -> Is storage pressuer tank necessay for RO system:
   -> O ring o-rings of Filter Casing Housing not available:
   -> Flow meter display instruction:
   -> Flow meter measurement accuracy:
   -> Air Bubbles in the water:
   -> Whole House System vs RO System:
   -> Booster pump for misting application:
   -> Installation of Auto Shutoff Valve:
   -> DI Filter is leaking or unable to tighten:
   -> Cracked Elbow Fitting:
   -> What is Flow Restrictor in RO Systems?
   -> ESO and TSO:
   -> New Feed Water Adapter
   -> Instruction for Refilling the 215 Inline DI filter
Shipping,Tax,& Returns
Terms & Conditions
Privacy Notice
Warranty
About Us
Product Showcase
Aquarium Photos
Contact Us
Support Manuals

Booster Pump Setup – Pressure Gauge and adjusting pressure:

The pressure gauge usually goes after the pump to measure the boost pressure.
It is not necessary to adjust boost pressure. It will increase to 60 to 80 psi at output.
If you really must adjust the boost pressure to a specific pressure, you can do this in 3
ways.
1. Adjust drain rate in the RO system
2. Use pressure regulator to adjust pressure
3. Location of the pump, if you install the pump in front of the RO system before stage 1,
the pressure is higher than if you installed before the membrane stage.
Continue
Home  |   Specials  |   Log In  |   Create Account  |   Checkout  |   Shopping Cart

Copyright © 2024 Filter Direct Online Store (C)