Booster Pump Setup – Pressure Gauge and adjusting pressure:

The pressure gauge usually goes after the pump to measure the boost pressure.
It is not necessary to adjust boost pressure. It will increase to 60 to 80 psi at output.
If you really must adjust the boost pressure to a specific pressure, you can do this in 3
ways.
1. Adjust drain rate in the RO system
2. Use pressure regulator to adjust pressure
3. Location of the pump, if you install the pump in front of the RO system before stage 1,
the pressure is higher than if you installed before the membrane stage.

Continue

1 x	KM701, Special Koolermax Filter Housing Canister Casing 1/4 FPT
1 x	733, Built-in Pressure Gauge 0 to 150 psi for Koolermax RO syste
1 x	KT-103, Optional Manual Membrane Flush Valve
1 x	Annual Filter Kit Koolermax Series KPAK-4 Sediment Carbon Block
1 x	OPTIONAL: 567 Filter Housing Wrench Case Opener WHOLE HOUSE WH
2 x	Wrench 2 pcs 566 Standard Filter Housing Opener Double Better
1 x	213, 5th or 6th stage inline carbon filter (replace in 12 mons)
2 x	Optional 5th or 6th Stage upgrade inline DI filter(color change)
1 x	Optional 225UP 5th stage Inline Alkaline upgrade(includes media)
1 x	201, 1st stage sediment filter (replace every 6-12 months)
1 x	DB40, DI Resin Refill Bag for DI210, RD322
1 x	Parts, Ro Water System Installation Parts Bag 1/4"
1 x	Y3414BR, Garden Hose Y Adapter Shutoff Valve Brass Construction
2 x	3rd stage C10 carbon block filter (replace every 6-12 months)
1 x	2nd stage C10 carbon block filter (replace every 6-12 months)
1 x	532bpg, PAE RO water pressure tank blue bladder gauge valve 4G
1 x	Optional: 566 Filter Housing Wrench Opener WaterGeneral System
1 x	DM-1, Inline Dual TDS monitor (meter) for RO DI System DM1
1 x	4th stage TFC150 US membrane filter (every 2-3 yrs)M150 P/N3150
1 x	Annual Filter Kit Koolermax Series KPAK-3 Sediment Carbon Block
1 x	205, 3rd stage solid carbon block filter (replace every 12month)
1 x	5th or 6th Stage IC21 inline carbon filter (every 6 to 12 mons)
1 x	Optional: 564 Membrane Filter Housing Wrench Opener
1 x	205 2nd stage solid carbon block filter (replace every 12 month)

View Cart	$533.50

1 x	KM701, Special Koolermax Filter Housing Canister Casing 1/4 FPT
1 x	733, Built-in Pressure Gauge 0 to 150 psi for Koolermax RO syste
1 x	KT-103, Optional Manual Membrane Flush Valve
1 x	Annual Filter Kit Koolermax Series KPAK-4 Sediment Carbon Block
1 x	OPTIONAL: 567 Filter Housing Wrench Case Opener WHOLE HOUSE WH
2 x	Wrench 2 pcs 566 Standard Filter Housing Opener Double Better
1 x	213, 5th or 6th stage inline carbon filter (replace in 12 mons)
2 x	Optional 5th or 6th Stage upgrade inline DI filter(color change)
1 x	Optional 225UP 5th stage Inline Alkaline upgrade(includes media)
1 x	201, 1st stage sediment filter (replace every 6-12 months)
1 x	DB40, DI Resin Refill Bag for DI210, RD322
1 x	Parts, Ro Water System Installation Parts Bag 1/4"
1 x	Y3414BR, Garden Hose Y Adapter Shutoff Valve Brass Construction
2 x	3rd stage C10 carbon block filter (replace every 6-12 months)
1 x	2nd stage C10 carbon block filter (replace every 6-12 months)
1 x	532bpg, PAE RO water pressure tank blue bladder gauge valve 4G
1 x	Optional: 566 Filter Housing Wrench Opener WaterGeneral System
1 x	DM-1, Inline Dual TDS monitor (meter) for RO DI System DM1
1 x	4th stage TFC150 US membrane filter (every 2-3 yrs)M150 P/N3150
1 x	Annual Filter Kit Koolermax Series KPAK-3 Sediment Carbon Block
1 x	205, 3rd stage solid carbon block filter (replace every 12month)
1 x	5th or 6th Stage IC21 inline carbon filter (every 6 to 12 mons)
1 x	Optional: 564 Membrane Filter Housing Wrench Opener
1 x	205 2nd stage solid carbon block filter (replace every 12 month)

View Cart	$533.50